Short Answer
Interpreting AIS targets for collision avoidance means reading the data broadcast by nearby vessels—position, speed over ground, course over ground, heading, rate of turn, and calculated closest point of approach (CPA) and time to CPA (TCPA)—and using that information to make early, correct anti-collision decisions. AIS is a powerful situational-awareness tool, but it is not a substitute for radar, visual lookout, or the International Regulations for Preventing Collisions at Sea (COLREGS). This article explains how to interpret AIS target data accurately, where it fits in a watchkeeping routine, and where its limits lie.
Main Explanation
What it is
Interpreting AIS targets is the practical skill of extracting meaningful collision-risk information from an AIS receiver or transponder display. In the context of independent sailing reference and tools, it is treated as a core seamanship topic—not tied to any single equipment brand, sailing school, or manufacturer. The goal is to help a recreational sailor understand what each AIS target field means, how to judge whether a target is a threat, and how to combine AIS with radar, visual bearings, and sound signals. The International Maritime Organization (IMO) Resolution A.1106(29) provides revised guidelines for the onboard operational use of shipborne AIS, and it makes clear that AIS is an aid to navigation, not a collision-avoidance system in itself.
Why it matters
Recreational sailors face several challenges when using AIS for collision avoidance. In busy waters, an AIS display can show dozens of targets, leading to information overload and alarm fatigue. Advice is often conflicting: some sources overstate what AIS can do, while older references may not reflect current Class B transponder behavior. The stakes are high—misreading a target’s CPA or TCPA, or assuming that every vessel appears on AIS, can lead to a close-quarters situation or collision. According to Prevention at Sea circular 08/2021, AIS information, particularly CPA and TCPA, should not be relied upon for collision avoidance; radar/ARPA remains the primary electronic anti-collision aid. A reliable, independent interpretation method helps sailors filter the noise and focus on targets that genuinely matter.
How it works
A structured approach to interpreting AIS targets draws on four areas. First, boat knowledge and reference: know whether your vessel carries a Class A or Class B AIS transponder, its update rate, antenna location, and how the AIS data is displayed on your chartplotter or multifunction display. Second, seamanship education: understand the COLREGS rules for risk of collision, relative motion, and the difference between AIS target data and radar/ARPA target data. Third, passage planning tools: overlay AIS targets on electronic charts, set guard zones and CPA/TCPA alarm thresholds, and use route monitoring to see how traffic intersects your planned track. Fourth, decision-support features: sort the target list by CPA or TCPA, filter out low-risk targets, and use trial maneuver functions if available. These tools work together to turn raw AIS sentences into actionable watchkeeping information.
How to do it
For a typical coastal passage, start before departure by verifying your own AIS data: MMSI, vessel name, dimensions, antenna offset, and GPS position. Once underway, set your display to show AIS targets with vector lines and CPA/TCPA data boxes. Monitor the target list and identify any vessel with a CPA below your safe margin—commonly 0.5 to 1 nautical mile in open water, more in confined waters. For each high-risk target, check its speed over ground, course over ground, heading, and rate of turn. Cross-check the AIS target with radar/ARPA and, if visible, take a visual bearing to confirm whether the bearing is steady and risk of collision exists. If risk of collision exists, take early and substantial action in accordance with COLREGS, and continue monitoring until the target is past and clear. Log any significant AIS target events as part of your watchkeeping record.
When not to do it
Do not rely solely on AIS for collision avoidance. Not all vessels carry AIS; small recreational craft, fishing vessels, military vessels, and vessels with faulty or switched-off transponders may not appear. Class B transponders transmit less frequently than Class A, so their position and vector data can be stale. AIS signals can be lost due to antenna issues, VHF propagation, or receiver overload in crowded areas. IMO Resolution A.1106(29) explicitly states that AIS information, particularly CPA and TCPA, should not be relied upon for collision avoidance, and that radar/ARPA is the primary electronic anti-collision aid. For close-quarters maneuvering in fog or heavy traffic, use radar, sound signals, and visual lookout. For tasks such as rigging inspection, hull survey, or professional weather routing, consult a certified surveyor, rigger, or human weather router rather than a digital reference alone.
Visual
The following step sequence summarizes a practical AIS target interpretation routine for collision avoidance.
- Confirm your own ship AIS data: MMSI, vessel name, dimensions, GPS position, and antenna offset.
- Set CPA and TCPA alarm thresholds appropriate for the waters—wider in open sea, tighter in pilotage waters.
- Scan the AIS target list and sort by CPA or TCPA to identify the closest or fastest-closing targets.
- Examine each high-risk target’s vector, speed over ground, course over ground, heading, and rate of turn.
- Cross-check the AIS target with radar/ARPA and, if visible, take a visual bearing to confirm risk of collision.
- Decide and act early in accordance with COLREGS, then continue monitoring until the target is past and clear.
Common Mistakes
Treating AIS as a collision-avoidance system
Many sailors assume that because AIS shows CPA and TCPA, it can replace radar or visual lookout. The consequence is a false sense of security and missed non-AIS targets. The correct approach is to use radar/ARPA as the primary electronic anti-collision aid and AIS as a supplementary situational-awareness tool.
Ignoring CPA and TCPA limitations
CPA and TCPA are calculated from current course and speed data. If either vessel alters course or speed, the values change. Relying on a single CPA/TCPA snapshot can lead to a late decision. Monitor trends over several updates and treat the values as advisory, not definitive.
Assuming all vessels appear on AIS
Not every vessel carries an AIS transponder. Small recreational boats, fishing vessels, and some commercial craft may not be visible. The consequence is a dangerous gap in situational awareness. Always maintain a visual and radar lookout, especially in coastal and inshore waters.
Not verifying your own ship data
Incorrect MMSI, vessel dimensions, or antenna offset can corrupt the data your vessel broadcasts and mislead other ships. It can also distort your own display if the GPS position is wrong. Check your AIS transponder configuration before departure and after any electronics work.
Confusing AIS targets with radar targets
Some displays merge AIS and radar targets, which can cause misidentification if the sources disagree. AIS and radar use different technologies and update rates. Ensure your display clearly indicates whether a target comes from AIS or ARPA, and cross-check the two independently.
Over-relying on AIS in crowded waters
In busy shipping lanes or harbors, an AIS display can show dozens of targets, causing alarm fatigue and missed critical contacts. Filter low-risk targets, prioritize by CPA/TCPA, and use radar and visual bearings to confirm the most dangerous targets.
Safety Note
AIS interpretation is a decision-support skill, not a replacement for the watchkeeper’s eyes, ears, radar, and judgment. Always cross-check critical navigation data—position, weather, tides—with official sources such as national hydrographic offices and weather services. Never use a tablet or phone as your only navigation tool; keep paper charts and a handheld bearing compass as backup. Take a certified safety and seamanship course that includes radar plotting and COLREGS. Follow the International Regulations for Preventing Collisions at Sea and local maritime regulations. Remember IMO Resolution A.1106(29): AIS information, particularly CPA and TCPA, should not be relied upon for collision avoidance; radar/ARPA remains the primary electronic anti-collision aid.
FAQ
Is AIS a substitute for radar when avoiding collisions?
No. IMO Resolution A.1106(29) states that AIS information, particularly CPA and TCPA, should not be relied upon for collision avoidance. Radar/ARPA remains the primary electronic anti-collision aid.
What do CPA and TCPA mean on an AIS display?
CPA is the closest point of approach—the minimum distance between your vessel and a target if both maintain current course and speed. TCPA is the time until that closest point. Both values change if either vessel maneuvers.
Why do some nearby vessels not appear on my AIS?
Not all vessels carry AIS. Small recreational craft, fishing vessels, and some commercial vessels may not have transponders. Class B transponders transmit less frequently, and signals can be blocked or out of range.
How often does AIS update target information?
Class A transponders typically update every 2 to 10 seconds depending on speed and maneuver status. Class B units update less frequently, often every 30 seconds or when speed or course changes. Always verify with radar or visual lookout.
Can I use AIS for collision avoidance in fog?
AIS can improve situational awareness in fog, but it must be combined with radar, sound signals, and a proper lookout. Do not rely on AIS alone because not all targets transmit AIS.

Leave a Reply